Smoke detector

Function:

(1) the code

In front of the detector into the battery, please wait 5 minutes to ensure that the internal power fully released, and then the battery into the battery box inside the detector in power transmission of signal; if the battery is not fully released, will be sent to the code signal detector.

(2) smoke alarm

When the ambient smoke concentration reaches the alarm value, the buzzer of the detector sends out the alarm sound, and the warning indicator light flashes quickly, and sends the smoke alarm signal to the host computer;

(3) low power reminder

When the buzzer about 40 seconds to issue a "beep" sound, while the alarm indicator light flashes 1 times, indicating that the detector has been in a low state of the state, the state of the timely replacement of the battery.

(3) sensitivity test

In order to ensure the normal work of the detector should be periodically tested, that once a month, press the "test the test button 1, enter the sensitivity test, detector alarm indicator light flashes, the buzzer alarm indicates that the detector is working properly.

* smoke detector does not have the key to the code, using the power of the code on the way to match the host.

* detector in low power state, will not send the low electric signal to the host.

003H MBR smoke alarm parameter table